Primers

MICROSEALER-PU

Download Technical Data Sheet

MICROSEALER-PU is a one component, 100% solids, polyurethane based primer suitable for all substrates. It is characterised by its very low viscosity and balanced curing speed which result in excellent wetting, impregnation and paint-over time on all substrates, whether of high, low or no porosity (e.g. glass and metals).  Additionally, it can be effectively used on both dry and wet concrete, even green concrete, not only as primer but also as a low-cost sealing solution, increasing, thus, the durability of the substrate.

The cured film displays outstanding mechanical properties: Its elongation is 400%, i.e. it matches perfectly that of the HYPERDESMO® System, and its tensile strength surpasses 20 N/mm2.

Apply with brush or roller.  Consumption: 100-500 gr/m2, subject to substrate porosity.

RECOMMENDED FOR:

To be used as primer for:

  • Humid, damp or wet concrete,
  • ceramic tiles,
  • other non-porous substrates like glass, marble & metals.

Also, for use as concrete sealer.

 

AQUADURTM

Download Technical Data Sheet

AQUADUR is a two-component, water based, epoxy coating.  It has a track record of more than 20 years of successful use as primer for the HYPERDESMO® line of products, as well as other Alchimica polyurethane based products. It is certified as “Class III” water and humidity barrier, which makes it ideal for applications subject to negative pressure / rising humidity.

An easy to use and safe (zero VOC) product with many applications besides priming.

Use as:

  • Primer in applications with rising humidity / negative pressure (tanks, pools, foundations etc.),
  • primer for other systems, e.g. epoxy or polyurethane based, cementitious,
  • sealing coat for concrete,
  • adhesive layer between old and new concrete,
  • water / humidity barrier.
 

UNIVERSAL PRIMER 2K 4060

Download Technical Data Sheet

UNIVERSAL PRIMER 2K 4060 is a two-component, solvent-less primer, for use with the HYPERDESMO® System and other polyurethane based products within the ALCHIMICATM line-up.

It is fast-curing and non-toxic (has zero V.O.C.).  Specially formulated for ensuring strong adhesion on humid or damp concrete.

To be used as primer for:
  • General use,
  • metals (also galvanized), aluminium, marble,
  • strengthening interlayer adhesion,
  • application under conditions of insufficient ventilation,
  • asphalt and asphaltic membranes,
  • οther, non-polyurethane based systems, e.g. acrylic paints.
 

PRIMER PU

Download Technical Data Sheet

Polyurethane, one component primer with low viscosity. Used for improving adhesion on porous substrates like concrete, wood, plaster etc.

 

PRIMER PU 100-E

Download Technical Data Sheet

PRIMER PU 100-E is a one component, 100% solids polyurethane based primer. The material has a very low viscosity and excellent impregnation properties on concrete. Furthermore, PRIMER PU 100-E has excellent mechanical properties. The elongation of the dry film is 400%, comparable to the Hyperdesmo line of products and the tensile strength is over 20 N/mm2.

Finally, the curing speed of the primer has been designed in such a way as to allow excellent wetting, impregnation and good over-painting time.

As a primer for:

  • Humid concrete
  • Damp or wet concrete.
  • Ideal for non-well ventilated areas.

Also works well as a concrete sealer.

 

PRIMER T

Download Technical Data Sheet

PRIMER T is one component, colorless, non-staining primer especially designed to secure the adhesion of PRIMER-T on non-porous substrates. Although designed for HYPERDESMO® T, it is fully suited for all products in the HYPERDESMO® product range.

PRIMER T is easily applied by wetting a clean cloth and essentially cleaning the surface to be protected with HYPERDESMO® T. PRIMER T dries quickly, within 10-15 minutes max. the surface is ready for application.

Recommended for priming of non-porous substrates:

  • Glassy tiles
  • glass
  • Slightly porous marble

 

Alchimica Building Chemicals